Tel: +86 152 0161 9036

E-pos: [e-pos beskerm]

EN
Alle kategorieë

Toerustingrak

home>Produk>Silindertoerusting>Toerustingrak

Hoë presisie reguit en spiraalvormige tandratrek van gelegeerd staal in lineêre aandrywing en swaardiens -transmissie op maat beskikbaar

Plek van Oorsprong:

Jiangsu Provinsie, China

Brand Naam:

JIANGSU WENAN HEAVY INDUSTRY CO., LTD.

Model nommer:

G-3

  • Beskrywing
  • spesifikasies
  • aansoeke
  • Mededingende voordeel
  • ondersoek
Beskrywing

Vinnige besonderhede:
1. Rack/ rack gear/ toothed bar/ toothed rack

2. Used in synchronization mechanism, linear guides, machine tools, manipulator,  etc.

3. Available: length<= 2 meters

Minimum Bestel Hoeveelheid:

1

prys:

Afhangend van spesifikasies

Verpakking Details:

krasbestand, roesbestand, klam, of soos versoek

Delivery Tyd:

Afhangend van die bestemmingsland

Toevoer Vermoë:

oorvloed

A gear rack is a special gear with teeth distributed on a bar-shaped body. It is equal to a segment of the circumference of a gear with an infinite diameter. There are many teeth evenly distributed on one side, meshing with gears, turning rotation into linear movement, or turning linear movement into rotation. The gear racks are also divided into spur racks and helical racks, which are paired with spur gears and helical gears respectively. The tooth profile of a gear rack is a straight line rather than an involute (for the tooth surface, it is a flat surface). It is equivalent to an infinite cylindrical gear with the index circle radius.

spesifikasies

materiaal

Legeringsstaal met hoë sterkte, bv. 18Cr2Ni4W, 20Cr2Ni4A, 17CrNiMo6, 18CrNiMo7-6, 20CrMnTi, 40CrNiMo, 30CrMnSi, 27SiMn, 35CrMo, 42CrMo, 40Cr, ens.

Module (mm)

0.5 ~ 10

Totale lengte (mm)

100 ~ 2000

Tandafwerking

Standaard, hoë presisie

Tand Tipe

Straight teeth, helical teeth

Toelaatbare wringkrag (Nm)

0 ~ 22000

aansoeke

(1) Synchronization mechanism. The synchronization mechanism of a gear rack is generally used in case of cylinder array power, hydraulic cylinder array power to ensure power synchronization and prevent movement mechanism from stalling and uneven motion caused by low processing accuracy.

(2) Movement direction conversion. A gear rack and pinion mechanism is an approach to convert linear motion into circular motion. In practical applications, it can be used with air cylinders and hydraulic cylinders. Under normal circumstances, the linear motion of a gear rack can be installed with linear guides and sliders.

(3) Motion output. A gear rack can be directly used as a motion output component and can be applied to the end effector of a manipulator and a driving mechanism of up and down movement.

Mededingende voordeel

- capability of customization of gear rack from drawings, 3D models, or simple part.

- capability of non-standard gear teeth of gear rack manufacturing.

- integriteit van die vervaardigingsproses, insluitend materiaalkeuse, smee, fyn bewerking, slyp, hittebehandeling en oppervlakbehandeling, ens.

ondersoek